Not sure how to properly hang your TV on the wall? This is not difficult if you follow a few rules:
- before you hang the TV, check the wiring plan so that you do not damage the wiring during installation, but rather entrust this matter to a specialist;
- a heavy panel (over 25 kg) is more convenient to hang together;
- When installing the TV on a wall, consider the ventilation space of the device so that the TV panel does not overheat during operation. The niche should have an indent from the upper and lower edges of 20-25 cm.
Before you hang the TV on the wall, decide what type of wall in your apartment in order to choose the right screws. They are:
- dowel for concrete,
- dowel for hollow bricks,
- in the form of "snail" or "butterfly" for drywall. When screwing the self-tapping screw, in the inner side of the wall, the dowel is unclenched like a butterfly, forming a reliable stop before hanging the TV on drywall;
- dowels not less than 30 mm - for a wooden wall.
When unpacking the box with the bracket, pay attention to the instructions and a set of dowels (4 pcs.), Bolts to the device, washers and spacers:
- remove the retractable bracket mechanism from the box,
- unscrew one of the two parts with a special wrench,
- Determine the height of the center of fastening the base of the bracket on the wall using a tape measure and a level,
- mark the holes for the screws,
- drill holes in the wall (it is better to drill concrete with a puncher) and insert dowels into them,
- screw the plate securely to the wall,
- Attach the second part of the bracket to the plate, after having screwed the bolts onto it.
Place the TV on a soft surface with the screen facing down to avoid damaging the surface. Unscrew the stand with a Phillips screwdriver. Holes are marked on the rear panel - for fixing the bracket slots. Fasten them and hang the structure on the bracket.
Installing the TV on the wall
Pay attention that all teeth fall under the plate:
- tighten the fixing bolts with a screwdriver,
- mask them with decorative caps,
- if your bracket does not have channel cables, use nylon clamps and position the cables as you wish.
To hang your LCD TV on the wall, choose the type of bracket that best suits your needs:
- non-adjustable structures are designed to securely fix the device to the wall. In most cases, they are used to mount TVs with a large diagonal;
- tilted brackets with a horizontal or vertical tilt are used for medium-sized screens;
- Swivel models make it possible to rotate the TV screen vertically and horizontally. Small panels are attached to such brackets, because the structure does not withstand heavy loads.
When buying a TV in our store, experienced craftsmen with the necessary equipment will professionally install and connect the device. They guarantee quality and timely service for the entire period of contractual obligations.
How high should the TV be hung?
The height for installing the device is selected purely individually. Optimal for vision - the location of the TV at eye level or 0.7-1.25 m from floor level.
Now you know how to hang your TV on the wall. Share your experience with us in the comments.
There is a good selection of TV mounts in the electronic catalog of our store. Order now. The goods will be at your home tomorrow.
