Dissolve 1-2 tablespoons of baking soda in 500 ml of water, put this solution on fire and, when the water boils, put silver and a piece of ordinary food foil in there. After 10-15 minutes, the silver will shine like new. Or you can simply soak the products in a baking soda solution for a few minutes, and then wipe them with a soft cloth.
Place aluminum foil and a piece of silverware on the bottom of the saucepan to remove any build-up from the jewelry. Boil water and add baking soda or soda ash to it at the rate of 50 g per 1 liter of water. soda. Wait until the mixture is over-bubbling and fill the decoration with this solution. Soda and aluminum will react with silver sulfide and after a few minutes the blackness will disappear. The chain or earrings will shine like new.
Silver can be easily cleaned and bleached from blackness at home with commercially available cleaning agents. Choose any method you like to clean silver and get started.
Method number 1: cleaning with lipstick
Regular lipstick is one of the best cleansers for silver. In its composition, it contains titanium dioxide and a lot of fat. Dioxide cleans well from dirt, and grease contributes to polishing to a shine.
- Take any tube and cotton pad that is lying around.
- Lubricate the jewelry with lipstick and rub until it squeaks.
The decoration is cleared of blackness right before our eyes.
Method number 2: cleaning silver with toothpaste
The toothpaste contains abrasive polishing microparticles - chalk, sand, etc. They perfectly remove plaque from silver jewelry without scratching them. Apply the paste to a damp brush. It is desirable that she has soft villi. They clean the surface more carefully and penetrate deeper into the decorated weaving of a chain, ring or earrings. Finally, rinse the jewelry with warm water and rub with a soft microfiber cloth.
Read here how to choose a ring to highlight the dignity of your hands.
If the blackness on a chain of silver or other jewelry still remains, I will try
take a radical way. Mix ammonia with toothpaste or tooth powder. Rub the product with this compound, then rinse with water.
Method number 3: cleaning with egg yolk
This method "came" to us from ancient times, when silver items were valued more than gold items. Soak a cotton ball in the yolk and rub the surfaces of the decoration. Then let it dry and wash off with water. Your pendant or brooch will not only clean well, but will not get dirty for a long time. Egg yolk protects against browning oxides.
Method number 4: cleaning silver with soda and aluminum foil
This is the fastest "recipe" for cleaning silver and one of the most effective. Place aluminum foil and a piece of silverware on the bottom of the saucepan to remove any build-up from the jewelry. Boil water and add baking soda or soda ash to it at the rate of 50 g per 1 liter of water. soda. Wait until the mixture is over-bubbling and fill the decoration with this solution. Soda and aluminum will react with silver sulfide and after a few minutes the blackness will disappear. The chain or earrings will shine like new. Rinse them under running water and dry them.
Do not clean silver jewelry with stones with "dry" soda. Abrasives aggressively affect the porous structure of natural inserts - pearls, turquoise, corals, etc. The stones become cloudy over time and lose their natural shine.
Method number 5: cleaning silver with hydrogen peroxide and ammonia
Take equal parts ammonia and hydrogen peroxide. Mix and place the decoration in the resulting solution.The container must be tightly closed, because the vapors of the ammonia solution are corrosive and with an eerie odor. Soak the decoration in the solution for 15-20 minutes, then rinse with water and dry.
Do not soak rings and earrings if the stones are glued on and not secured with "paws". In water, the glue will get wet and the stones will fall out.
We want to warn you: cleaning silver with hydrogen peroxide is an unjustified risk. Despite the fact that hydrogen peroxide bleaches silver well, it actively reacts with other chemicals. If you do not know the composition of your product, the result may be the opposite of the desired one. The decoration will become dull, a dark coating appears. Over time, it washes off and the dullness disappears. But our goal is to clean the product, not contaminate further. Therefore, we do not recommend experimenting and cleaning the drag metal with hydrogen peroxide.
Find out how to choose earrings to go with your face here.
Method number 6: cleaning silver with ammonia solution (ammonia)
Ammonia is the easiest method, which 100% copes with cleaning silver with stones. It returns the pristine shine to cloudy stones, dissolves black layers from the surface in seconds. All you need to do is pour ammonia into a resealable jar. Put your rings, chain, earrings there, and shake vigorously. Once the jewelry is clean, rinse with water and wipe dry.
The result is on the face: the earrings, peeled in ammonia solution, look like new. The dirt is gone, the stones are shining again.
Of all the tried and tested methods for cleaning silver jewelry, ammonia solutions and a combination of soda with aluminum foil turned out to be the best. The ammonia quickly dissolves even stubborn layers in hard-to-reach areas of pattern interweaving, gives shine to precious inserts without damaging them. The soda solution is in no way inferior in the quality of cleaning. The only thing is that you should not clean products with inserts in this way, so that they do not come off during soaking.
If you need to whip up your ring or earrings, use toothpaste or lipstick..
Despite the fact that peroxide cleans the drag metal well, in some cases it reacts violently with other impurities and forms a plaque that is difficult to get rid of. If you don’t know its composition, we do not recommend cleaning silver items this way.
Read: "7 Tricks to Keep the Bathroom Mirror Mist-Free"
Watch the video on how to quickly clean silver with baking soda and aluminum foil
